Remworth

Aura repricer integrationYour real buy cost in Aura.
Kept current, every 30 minutes.

Connect your Aura repricer to Remworth and each SKU's current FIFO buy cost, plus the min and max set when you bought it, typed by you or filled in from your Settings, goes to Aura automatically. Aura still does the repricing. Remworth keeps the cost it works from in step with what you actually paid.

What Remworth sends to Aura

Three numbers per SKU.

Remworth writes only the cost, minimum price and maximum price, in US dollars, on your Amazon listings in Aura. Your Aura strategies and repricing settings are not changed.

Cost
the buy cost of the batch that sells next (first in, first out), per Amazon listing unit; a multipack carries the whole pack's cost
Min and max
the ones on that batch in Remworth: what you typed when you bought it or later on the order, or, where you left one empty on a new buy, the Min or Max Remworth filled in from your Settings; a batch with neither leaves Aura's own alone
When
every 30 minutes, plus Sync now whenever you like
What gets written
only the fields that differ from what Aura already has; listings that already match are counted as in sync
A new batch
when the oldest batch sells out, the next batch's cost goes to Aura on the following sync, with its min and max if it has them
Your Aura edits
a min or max you change in Aura is kept until a new batch starts selling or you change it in Remworth; the Preview and Sync now summary counts the SKUs where your edit was kept
Cost edits in Aura
cost always follows Remworth, so the next sync puts your FIFO cost back
Which SKUs
products you sent to FBA through Remworth that still have units left on a batch recorded in Remworth, matched by seller SKU to the active Amazon listings in your Aura account; Walmart listings in Aura are never touched
Exclusions
a per-SKU list for products you price by hand
Record
Preview lists each SKU, field, current value and new value without writing anything; Recent pushes lists what each run sent, SKU by SKU, and flags any update Aura turned down

Set it up

Connect Aura once. It runs from there.

You need your own Aura account. Remworth connects to it with your Aura API key.

  1. Copy your Aura API keyIn Aura, open Settings, go to the developers page, and copy your API key.
  2. Exclude what you price by handIn Remworth, go to Settings, Integrations, Aura Repricer, and add any SKUs Aura should never receive from Remworth. Remove one later and it goes out on the next run.
  3. Save the keyPaste the key and save. Only the account owner can save or clear it, and a saved key is never shown again. From then on the sync runs every 30 minutes.
  4. Preview any timePreview lists every SKU and field that would change, with the value Aura has now and the value it would get, without writing anything to Aura.
  5. Sync now, then check the logSync now pushes straight away instead of waiting for the next run. Recent pushes shows what went out, SKU by SKU.

Cost by hand or cost by sync

Still typing costs into your repricer?

A repricer only knows the cost it is given. Typed in once, that cost goes stale the day a pricier batch starts selling.

The jobTyped into Aura by handSent from Remworth
A new batch cost moreupdate each SKU when you rememberthe new batch's cost goes to Aura on the next sync after the older batch sells out
Which cost is currentwork out which batch is selling nowalways the oldest batch still in stock, the one that sells next
Multipacksmultiply the unit cost by the pack yourselfAura gets the cost of the whole pack you sell as one unit
Products you price yourselfskip them every time you updateone exclusion list keeps them out of every sync
Checking what changedcompare before and after by handPreview before, Recent pushes after

Straight answers

What the Aura sync doesn't do.

Where the numbers come from

Questions

Aura repricer questions

Does Aura know my real cost?

Only if it's given one. Aura keeps a cost on each listing. With Remworth connected, that cost is the buy cost of the batch you'll sell next, checked every 30 minutes and updated when a batch sells out.

Can Aura reprice below break-even?

It can if your min price is too low. A repricer moves your price between the min and max it holds. Remworth keeps Aura's cost current and sends the min on the batch. On a new buy, an empty Min is filled with the price that makes the ROI set in your Settings, 15% unless you change it, and a min you type always wins. If you type your own, set it to cover your buy cost, inbound freight, the FBA fee, your other costs and Amazon's referral fee, which is a percentage of the total price (shipping and gift wrap included) or a minimum amount, whichever is greater, and varies by category (Amazon's fee page).

What does Remworth send to Aura?

Three numbers per SKU: cost, minimum price and maximum price. Only the fields that differ from what Aura has are written. Your Aura strategies and repricing settings are not changed.

Will the sync overwrite the min and max I set in Aura?

Not until something changes on Remworth's side. On a SKU's first sync, a min and max already in Aura are kept and only blank ones are filled. After that, a min or max you change in Aura stays until a new batch of that product starts selling or you change it in Remworth. Cost is different: it always follows Remworth.

How often does Remworth update Aura?

Every 30 minutes. Press Sync now in Settings to push straight away, or Preview to see the changes without touching Aura.

What is COGS, and which cost should my repricer use?

COGS is what the units you sold cost you. For goods bought to resell, the IRS counts the invoice price minus discounts, plus transportation or other charges to acquire them. Under the FIFO (first in, first out) method, the items you bought first are counted as the first ones sold (IRS Publication 538). So the cost behind your next sale is your oldest batch still in stock. That buy cost is what Remworth sends to Aura, and it is the same buy cost your P&L books when that unit sells. Freight is booked separately in the P&L, so allow for it in your min. More on FIFO and COGS.

Does Remworth reprice my listings?

No. Remworth isn't a repricer: it doesn't change your Amazon price as competing offers move. Aura does the repricing, and Remworth keeps the cost and limits it works from current. Aura is the only repricer Remworth connects to today.

Can I try Aura and Remworth free?

Aura's own site offers a free 14-day trial with no credit card (checked October 2026). Remworth has a free 7-day trial with a card on file, and the Aura sync is included in both Remworth plans.

Give Aura the cost you actually paid.

Start the free 7-day trial and connect Amazon. Once your products go to FBA through Remworth, save your Aura key and press Preview to see what the sync would send before anything is written.

Solo $199.99/mo · Pro $349.99/mo · 7 days free, card required

On your phone? Start with just your email. The link we email you works once, on any device, within 7 days, and the app opens once you've picked a plan, added your card and connected your Amazon seller account.

Your Amazon password stays with Amazon. How Remworth connects.

Sources

  1. Aura home page Aura reprices Amazon and Walmart listings; free 14-day trial, no credit card (checked October 2026)
  2. Aura API: authentication API keys are managed in Aura Settings, on the developers page
  3. Aura API: the listing object each listing holds a cost, a minimum price and a maximum price
  4. Amazon: selling fees referral fee: a percentage of the total price or a minimum, whichever is greater, by category
  5. Amazon: Holiday 2026 fee announcement (Seller Forums) holiday peak fulfillment fees, Oct 15, 2026 to Jan 14, 2027
  6. IRS Publication 538: Accounting Periods and Methods the FIFO method, and what the cost of goods bought for resale includes